Controls the functionality provided by the AutoCAD link:

0 – Basic AutoCAD link features only
1 – Basic AutoCAD link features plus sheet set support (default)
2 – Basic AutoCAD link features plus plain drawing asset management support (not for use with AutoCAD P&ID or AutoCAD Plant 3D)
3 – Enable all AutoCAD link features

Controls the P&ID functionality provided by the AutoCAD link. This setting requires AutoCAD P&ID or AutoCAD Plant 3D.

0 – P&ID project features only (default)
1 – P&ID project features plus asset management support

Controls the synchronization of the folder specified for Civil3DSyncWorkingFolder:

1 – Synchronize to the local working folder (on drawing open)
2 – Synchronize to the vault (on drawing close)
4 - Ask the user before synchronization
8 - Synchronize only once per AutoCAD session

If this value is 1, synchronizes the entire folder that is specified as the working folder in AutoCAD Civil 3D. If this value is 0 (default), only the data shortcuts folder is synchronized.

By default, the AutoCAD link updates mapped title block attributes automatically depending on the settings configured for the vault. This value provides additional control over when title block attribute updates occur.

The possible values are:

0 – Perform all automatic updates (default)
1 – Disable automatic updates when documents are opened
2 – Disable automatic updates when documents are saved
3 – Disable all automatic updates

Note    To control updates to individual title blocks, see the AutoUpdate setting described in the BlueCielo Meridian Enterprise Configuration Guide.

Controls the generation of thumbnail images during link updates. If this value is 0 (default), thumbnails are not saved. If it contains 1, thumbnails are saved.

Warning    If this value is 1 and thumbnail generation fails for any reason, it could prevent property synchronization, which could be more important.

This setting is for supporting AutoCAD drawing title block updates over a Citrix remote access connection. If this setting is 1, the drawing is opened for reading only and changing its content is performed by using a temporary file. The default is 0.

This setting is for supporting AutoCAD drawing title block updates over a Citrix remote access connection. If this setting is 1 and DocAccessUseTmpFileOnSave is set to 1, the temporary file is created in the system temporary folder. If it is set to 0 (default), the file is created in the same folder as the original file.

If this value is 1 (default), the Sync Properties to File command works with AutoCAD Release 14 and older drawings but importing drawings can fail if the title blocks are synchronized also. If this value is 0, the command does not work with older drawings but importing drawings will not fail if the title blocks are synchronized.

If this value is 1, Civil 3D data shortcuts are automatically released from their workflows when they are imported to the vault by working folder synchronization. If this value is 0 (default), the shortcuts are not automatically released.

If this value is 1, shows the AutoCAD link menu bar. If this value is 0, the menu bar is hidden.

Controls the style of the display of the BlueCielo page in the AutoCAD Ribbon.

The possible values are:

0 – Without items rows
1 – With item rows (default)

For more information, see the BlueCielo Meridian Enterprise User's Guide .